Commercial Facade Cleaning in New England
Pura Softwash uses biodegradable softwash solutions to eliminate biological growth at the root and protect your building envelope for the long term.
Commercial Facade Cleaning That Treats the Cause, Not Just the Symptom
The black streaking and green discoloration on your building’s exterior aren’t surface dirt. They’re algae, mold, and mildew colonizing the facade, and pressure washing removes what you can see while leaving the root biology intact. That’s why biological staining returns within months. Pura Softwash’s building exterior cleaning services use biodegradable solutions that penetrate the surface and eliminate organic growth at the root. Results last exponentially longer than traditional pressure washing, and the process doesn’t carry the surface damage risk that high-pressure systems do on coatings, cladding, and mortar joints.
The Wrong Cleaning Method Can Cost You More Than a Dirty Facade
Not every facade responds to the same solution, and applying the wrong one risks coating damage, surface etching, or results that don’t last. Pura Softwash assesses the substrate before selecting any treatment, then uses metered equipment to dial in the right concentration of soap or bleach for that specific surface. It’s the same biodegradable softwash process across the board, calibrated differently every time so the method fits the material rather than the other way around.
Pura Softwash handles commercial building exterior cleaning services across the full range of facade materials, including:
Concrete
Brick and stone
EIFS and stucco
Metal panel and vinyl siding
Get Your Facade Cleaning Plan With Pura Softwash
Tell us about your building, and we’ll put together a commercial facade cleaning plan built around your surface materials, your timeline, and your access requirements.
What Your Commercial Facade Cleaning Project Looks Like With Pura Softwash
Site Assessment and Scope Confirmation
Before any work begins, Pura Softwash reviews the building envelope, identifies surface materials, and assesses the level of biological contamination. You get a written scope and a firm project timeline before mobilization so there are no surprises on either end.
Vendor Readiness and Pre-Job Documentation
Pura Softwash arrives with a certificate of insurance and complete vendor documentation ready to submit. Before-and-after photos are standard on every job. Site controls to protect landscaping, signage, and adjacent surfaces are part of the pre-job plan, not an afterthought.
On-Site Execution and Closeout
Off-hours and low-disruption scheduling are available for occupied properties like hotel properties and high-rise buildings. Every project closes with a checklist-based verification and a documented record of what was completed.
Case Study: 7 Buildings, Half the Time
The challenge
Covenant Living, an assisted living campus in Connecticut, had multiple 3- to 4-story buildings with years of accumulated biological growth on their roofs, siding, and exterior facades. The campus was occupied and operating, which ruled out conventional approaches that require heavy equipment staging through active areas.
The solution
Pura Softwash deployed drone-assisted softwash across all 7 buildings, applying biodegradable solutions matched to each surface type across roofs, siding, and exterior facades. The occupied facility stayed operational throughout the project.
The result
The full campus was completed in roughly half the time traditional methods would have required. Covenant Living rehired us the following year.
Frequently Asked Questions
What's the difference between softwash and pressure washing for a commercial building exterior?
Pressure washing is just water. It removes what’s visible on the surface but leaves no chemical treatment behind, so biological growth returns on the same cycle. Pura Softwash’s process uses biodegradable solutions that kill algae, mold, and mildew on contact and leave a protective barrier that defends the surface against regrowth. That’s why softwash results last exponentially longer, and why it doesn’t carry the surface damage risk that high-pressure systems introduce on coatings, cladding, and mortar joints.
Is facade cleaning the same as building facade restoration?
They overlap but aren’t identical. Building facade restoration typically refers to structural or cosmetic repairs: repointing mortar, patching stucco, replacing damaged cladding. Pura Softwash’s commercial facade cleaning removes biological growth, staining, and environmental buildup from the existing surface. In many cases, a thorough cleaning is the first step before any restoration work begins, and clients are sometimes surprised how much the underlying surface improves once years of biological staining are removed. We’ll flag anything during the site assessment that looks like it falls outside the scope of cleaning.
Do you need to do anything to the property before Pura Softwash arrives?
One step that falls on the property manager when bleach-based solutions are being used during commercial building envelope washing: hydrating surrounding foliage a few days before the job. Pura Softwash will flag this during the pre-job walkthrough. Beyond that, site controls and surface protection are handled by the crew. You’ll know exactly what’s expected before mobilization.